Sheet metal blank thickness 65 mm 1.2767 - X45NiCrMo4 - 19 655

Standards and Designation

• Numerical designation: 1.2767

• DIN designation: X45NiCrMo4

• EN designation: 45NiCrMo16

• Category: Alloyed cold-work tool steel

Chemical Composition (typical values, %)

• C: 0.45 %

• Ni: 4.0 %

• Cr: 1.3 %

• Mo: 0.25 %

• Mn: <= 0.40 %

• Si: <= 0.40 %

• P, S: max. 0.025 %

Properties

• very high toughness and impact resistance (due to high nickel content)

• good dimensional stability during heat treatment

• high strength even in large cross-sections

• very good wear resistance after hardening

• good machinability in annealed condition

Heat Treatment

• Annealing (soft annealing): 680 – 720 °C, slow cooling

• Hardening: 830 – 860 °C, quenching in oil or air

• Tempering: 540 – 680 °C depending on required hardness

• Hardness after annealing: max. 229 HB

• Hardness after hardening and tempering: approx. 52 – 54 HRC

Applications

• blanking and cutting tools for cold work

• forming rolls and tools for heavy loads

• dies and moulds for plastic processing

• highly stressed machine parts requiring a combination of strength and toughness
  (e.g., shafts, spindles, gears)